for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 8 8 - 20 hmc311st89 / 311st89e ingap hbt gain block mmic amplifier, dc - 6 ghz v03.0710 general description features functional diagram the hmc311st89(e) is a gaas ingap heterojunc- tion bipolar transistor (hbt) gain block mmic smt dc to 6 ghz amplifi er. packaged in an industry standard sot89, the amplifi er can be used as either a cascadable 50 ohm gain stage or to drive the lo of hmc mixers with up to +16.5 dbm output power. the hmc311st89(e) offers 16 db of gain and an output ip3 of +31.5 dbm while requiring only 54 ma from a +5v supply. the darlington feedback pair used results in reduced sensitivity to normal process variations and yields excellent gain stability over temperature while requiring a minimal number of external bias components. p1db output power: +15.5 dbm output ip3: +31.5 dbm gain: 16 db 50 ohm i/os industry standard sot89 package included in the hmc-dk001 designers kit typical applications the hmc311st89(e) is ideal for: ? cellular / pcs / 3g ? fixed wireless & wlan ? catv & cable modem ? microwave radio electrical specifi cations, vs= 5v, rbias= 22 ohm, t a = +25 c parameter min. typ. max. units gain dc - 1.0 ghz 1.0 - 4.0 ghz 4.0 - 6.0 ghz 14.0 13.0 12.5 16.0 15.0 14.5 db db db gain variation over temperature dc - 2.0 ghz 2.0 - 4.0 ghz 4.0 - 6.0 ghz 0.004 0.007 0.012 0.007 0.012 0.016 db/ c db/ c db/ c return loss input / output dc - 2.0 ghz 2.0 - 5.0 ghz 5.0 - 6.0 ghz 8 7 8 db db db reverse isolation dc - 6 ghz 20 db output power for 1 db compression (p1db) dc - 2.0 ghz 2.0 - 4.0 ghz 4.0 - 6.0 ghz 13.5 12.0 10.0 15.5 15.0 13.0 dbm dbm dbm output third order intercept (ip3) dc - 1.0 ghz 1.0 - 2.0 ghz 2.0 - 4.0 ghz 4.0 - 6.0 ghz 31.5 30 27 24 dbm dbm dbm dbm noise figure dc - 4 ghz 4.0 - 6.0 ghz 4.5 5 db supply current (icq) 55 74 ma note: data taken with broadband bias tee on device output. information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 8 8 - 21 output return loss vs. temperature broadband gain & retur n los s gain vs. temperature reverse isolation vs. temperature input return loss vs. temperature noise figure vs. temperature -20 -15 -10 -5 0 5 10 15 20 0123456789 s21 s11 s22 response (db) frequency (ghz) 4 6 8 10 12 14 16 18 20 012345678 +25 c +85 c -40 c gain (db) frequency (ghz) -20 -15 -10 -5 0 012345678 +25 c +85 c -40 c return loss (db) frequency (ghz) -20 -15 -10 -5 0 012345678 +25 c +85 c -40 c return loss (db) frequency (ghz) -25 -20 -15 -10 -5 0 012345678 +25 c +85 c -40 c reverse isolation (db) frequency (ghz) 0 2 4 6 8 10 12345678 +25 c +85 c -40 c noise figure (db) frequency (ghz) hmc311st89 / 311st89e v03.0710 ingap hbt gain block mmic amplifier, dc - 6 ghz information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 8 8 - 22 power compression @ 6 ghz p 1 db vs. temperature psat vs. temperature output ip3 vs. temperature power compression @ 1 ghz gain, power, oip3 & supply current vs. supply voltage @ 1 ghz 4 6 8 10 12 14 16 18 012345678 +25 c +85 c -40 c p1db (dbm) frequency (ghz) 4 6 8 10 12 14 16 18 012345678 +25 c +85 c -40 c psat (dbm) frequency (ghz) -4 -2 0 2 4 6 8 10 12 14 16 18 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 pout gain pae pout (dbm), gain (db), pae (%) input power (dbm) -4 -2 0 2 4 6 8 10 12 14 16 18 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 pout gain pae pout (dbm), gain (db), pae (%) input power (dbm) 10 14 18 22 26 30 34 012345678 +25 c +85 c -40 c ip3 (dbm) frequency (ghz) 5 10 15 20 25 30 35 40 10 20 30 40 50 60 70 80 4.5 4.75 5 5.25 5.5 gain p1db psat ip3 icq gain (db), p1db (dbm), psat (dbm), ip3 (dbm) icq (ma) vs (vdc) hmc311st89 / 311st89e v03.0710 ingap hbt gain block mmic amplifier, dc - 6 ghz information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 8 8 - 23 outline drawing absolute maximum ratings collector bias voltage (vcc) +7v rf input power (rfin)(vcc = +3.9v) +10 dbm junction temperature 150 c continuous pdiss (t = 85 c) (derate 5.21 mw/c above 85 c) 0.34 w thermal resistance (junction to lead) 191 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c part number package body material lead finish msl rating package marking [3] hmc311st89 low stress injection molded plastic sn/pb solder msl1 [1] h311 xxxx HMC311ST89E rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] h311 xxxx [1] max peak refl ow temperature of 235 c [2] max peak refl ow temperature of 260 c [3] 4-digit lot number xxxx package information notes: 1. package body material: molding compound mp-180s or equivalent. 2. lead material: cu w/ ag spot plating. 3. lead plating: 100% matte tin. 4. dimensions are in inches [millimeters] 5. dimension does not include moldflash of 0.15mm per side. 6. dimension does not include moldflash of 0.25mm per side. 7. all ground leads must be soldered to pcb rf ground. electrostatic sensitive device observe handling precautions hmc311st89 / 311st89e v03.0710 ingap hbt gain block mmic amplifier, dc - 6 ghz information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 8 8 - 24 application circuit pin descriptions pin number function description interface schematic 1r f i n this pin is dc coupled. an off chip dc blocking capacitor is required. 3r f o u t rf output and dc bias for the output stage. 2, 4 gnd these pins and package bottom must be connected to rf/ dc ground. recommended component values component frequency (mhz) 50 900 1900 2200 2400 3500 5200 5800 l1 270 nh 56 nh 18 nh 18 nh 15 nh 8.2 nh 3.3 nh 3.3 nh c1, c2 0.01 f 100 pf 100 pf 100 pf 100 pf 100 pf 100 pf 100 pf note: 1. select rbias to achieve icq using equation below, rbias > 22 ohm. 2. external blocking capacitors are required on rfin and rfout. icq = vs - 3.8 rbias hmc311st89 / 311st89e v03.0710 ingap hbt gain block mmic amplifier, dc - 6 ghz information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 8 8 - 25 evaluation pcb the circuit board used in the fi nal application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appropriate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 108313 [1] item description j1 - j2 pcb mount sma connector j3 - j4 dc pin c1, c2 capacitor, 0402 pkg. c3 100 pf capacitor, 0402 pkg. c4 1000 pf capacitor, 0603 pkg. c5 2.2 f capacitor, tantalum r1 resistor, 0805 pkg. l1 inductor, 0603 pkg. u1 hmc311st89(e) pcb [2] 107368 evaluation pcb [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 hmc311st89 / 311st89e v03.0710 ingap hbt gain block mmic amplifier, dc - 6 ghz information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
|
